Handy DIY Plumbing Tips

Handy DIY Plumbing Tips For The Homeowner

Plumbing encompasses a lot of things. It covers items such as sinks, showers pipes, waste systems, etc. There are so many ways that one can can maintain and repair their own system for their own home needs. This article has advice that can help you find what you need to know to start.

To avoid having your outdoor faucets freeze up in the winter, detach all hoses before the first freeze. Also, close the shutoff valve that leads to the outdoor faucets, then turn on the outdoor faucets to let any remaining water in the lines drain. Once temperatures warm up in the spring, you can reverse the process.

Avoid the use of products for your toilet that help with odor, such as bleach tablets. These tablets have chemicals that can damage rubber parts that are essential to the proper functioning of your toilet.

If your water is coming out black, then most likely you have an iron and magnesium issue to your water. You need to contact a water softener company, and get them to come out and assess your water. They will be able to fix the problem by adding a water softener.

Avoid using hard cleaners on your toilets, such as drop-in cleaner tabs in the tank. When these tabs are almost completely dissolved, what’s left of the tab gets washed into the bowl. This can then end up clogging the toilet’s port holes, preventing the toilet from flushing properly. It can take months for this debris to finish dissolving in those holes.

Have you tried patching your pipe with the store-bought patching kits only to have that section of your plumbing continue leaking? Replacing the damaged pipe is a more permanent solution than patching. First, you must shut off the main water valve, and drain the water from the damaged section. Cut out the damaged section of the copper pipe, leaving about an inch of extra pipe on both sides of the damaged area. Remove corrosion from inside the pipes with a wire brush. Apply flux to the replacement pipe and the remaining pipe. Slide the piece of replacement pipe into place with couplings. Apply solder all around the joint, and use a propane torch to solder the replacement section into place.

In order to keep your garbage disposal in optimal working condition, run it on a regular basis. Just a simple 60 seconds per day under cold water can keep it running clean and smooth. If not run regularly, your disposal can be susceptible to corrosion that will eventually make it inoperable.

If your plumbing is making strange noises you may have lost something called your “air cushion”. To turn this back on, you’re going to need to turn off your main water supply. Run all faucets in your house and then turn back on your main water supply. This should make everything sound better again.

In conclusion, plumbing is a very broad subject that covers a lot of everyday home improvements. There are some right ways and wrong ways to do it, but there is so much room for learning. Hopefully, this article gave you some advice on how to make plumbing work for you.